Product information
Information required by the delegated act
Pending: No ESPR delegated act covers this product group yet, so the information a passport must carry is not defined. The verified technical data is listed below.
A voluntary draft prepared in anticipation of possible future EU Digital Product Passport requirements under the Ecodesign for Sustainable Products Regulation (ESPR). No delegated act covers this product group yet. This page is preparatory material and does not constitute proof of compliance, and the product has not been registered in the EU DPP registry. Regulation status checked on 19 November 2026.
ISBM molding auxiliaries (dryer-loader, chiller, air compressor & mold dehumidifier)
One-step injection stretch blow molding container quality depends directly on resin dryness, mold thermal stability, clean blowing air, and condensation-free cavity surfaces. SanSong supplies four matched auxiliary units sized alongside its 8 three-station and four-station ISBM machines: (1) a 3-in-1 dehumidifying dryer and vacuum auto-loader, (2) an industrial chilled-water unit, (3) a high-pressure air compressor station, and (4) a mold-area cavity dehumidifier.
The 3-in-1 dryer-loader removes trace moisture from hygroscopic polymers (PET, RPET, PETG, Tritan/PCTG, PC, PPSU) before plasticizing to prevent hydrolysis haze and bubbles. Simultaneously, the industrial chiller stabilizes core-rod, neck-mold, blow-mold, and hydraulic oil temperatures, the air compressor station delivers dry oil-free air for stretch-blowing, and the mold dehumidifier blankets chilled platens in low-dew-point air during humid seasons.
Auxiliary hopper volume (kg), refrigeration capacity (kW), air delivery (m³/min, MPa), and electrical load are calculated per order from the chosen ISBM machine model, hourly polymer throughput, and ambient workshop climate. Annex III item (h) notes that auxiliary skids may incorporate specialized OEM compressors, dryers, or chillers whose manufacturer identifiers are documented per shipment.
Product group: Plastics auxiliary machinery: resin drying, mold cooling, compressed air and cavity dehumidification units. Regulation (EU) 2024/1781 (ESPR) makes a Digital Product Passport mandatory only for product groups that a delegated act covers. No delegated act covers this group yet, so the passport below is a voluntary draft. It is organised around the items in Annex III and can be updated once the applicable requirements are set.
The product is not registered. Under Implementing Regulation (EU) 2026/1778, a verified economic operator, or a verified representative acting for it, can register a product once the applicable product rules require a passport. This website does not register products on SanSong’s behalf.
1 of 11 items carry data SanSong has published. Each pending item names the document or decision still missing.
Information required by the delegated act
Pending: No ESPR delegated act covers this product group yet, so the information a passport must carry is not defined. The verified technical data is listed below.
Model, batch or item, as the delegated act sets
Pending: Auxiliary units are sized and matched per order to the selected ISBM machine, resin throughput and plant climate. Unit model codes and serial numbers are confirmed in the shipment list.
Global Trade Item Number (ISO/IEC 15459-6)
Pending: SanSong has not supplied a Global Trade Item Number (GTIN) for this product, and none is assigned on this page. How each individual product is identified is for SanSong to confirm.
HS, CN or TARIC code
Pending: SanSong to confirm the commodity codes against its export declarations (dryers, chillers, compressors and dehumidifiers fall under distinct HS headings when itemized).
Declaration of conformity, technical documentation, certificates
Pending: Waiting for SanSong's declaration of conformity and technical documentation for CE marking (awaiting client DoC): an EC declaration of conformity under Machinery Directive 2006/42/EC, or an EU declaration of conformity under Machinery Regulation (EU) 2023/1230 from 20 January 2027. SanSong holds a verified GB/T 19001-2016 / ISO 9001:2015 quality management system certificate (No. 11426Q00192R201, EACC, valid 2026-01-23 to 2029-01-22) covering R&D, production, and sale of hollow forming equipment and non-standard automatic devices; this QMS certificate does not replace a CE Declaration of Conformity.
User manual, instructions, warnings, safety information
Pending: Waiting for SanSong's user manual and safety instructions (PDF). They will be linked here when received.
Name, trade name, postal address, contact, operator identifier
Source: SanSong brand unification master record (2026-11-19) and GB/T 19001-2016 / ISO 9001:2015 certificate No. 11426Q00192R201 (USCC 914502000674272010). Public trade name unified as SanSong. ISBM and mold sales contact confirmed in SanSong's 2026-11-19 brand unification record and April 2026 product brochures.
Identifiers of operators other than the manufacturer
Pending: Robots and controllers built into a system may come from other manufacturers. SanSong to supply, for each project, the name and unique operator identifier of each such manufacturer and of any distributor or agent involved in EU sales.
Unique identifiers of the production facilities
Pending: SanSong has not supplied a unique facility identifier for its plant in Liuzhou (ESPR Article 12). SanSong to confirm whether one exists.
Importer details and EORI number
Pending: The EU importer depends on each order. SanSong to supply the importer and its EORI number for each order.
Name, contact and identifier of the operator established in the EU
Pending: No economic operator established in the EU has been named yet (for example, an authorised representative). SanSong to confirm.
Only data SanSong has published is listed. It is not the Annex III (a) information, which a delegated act will define.
Source: SanSong product page and SanSong 2026 Seven-Product-Lines Catalog (Slide 15). Additional project parameters confirmed on request: Dryer hopper capacity (kg), chiller cooling capacity (kW) & refrigerant type, air compressor discharge pressure (MPa) & free air delivery (m³/min), and OEM sub-supplier identifiers.
Quality management system certificate covering both SanSong's ISBM hollow forming equipment and robotic / non-standard automation divisions (subject to periodic surveillance audits). It is a management-system certificate, not a CE Declaration of Conformity or proof under EU product legislation.
passport.json carries the same Annex III items as this page, plus the technical data, repair details and QMS metadata, as structured JSON (format growthos.eu-dpp.v1). The page head also holds a schema.org Product record with the same identifiers.
An ISO/IEC 18004 Level Q QR code that opens https://lzsaso.com/product-passport-isbm-auxiliaries. Proposed: next to the machine nameplate and in the delivery documents. SanSong to confirm the position.
Proposed retention: this page and its machine-readable file stay online for the expected lifetime of the product plus at least 10 years, and earlier versions are kept when the passport changes. SanSong to confirm the period.
All 11 items are public; none is restricted. The passport holds no personal data of buyers or users.
Regulation status checked on 19 November 2026; it is checked again every quarter. Passport version 2026-11-22.
About the ISBM molding auxiliaries passport and the EU rules behind it.
Which 4 auxiliary units make up SanSong’s ISBM molding auxiliary lineup?
The lineup comprises: (1) 3-in-1 dehumidifying dryer and vacuum auto-loader, (2) industrial mold and hydraulic chiller, (3) clean air compressor system, and (4) mold-cavity dehumidifier.
Are ISBM auxiliaries mandatory in a SanSong machine order or itemized options?
They are quoted as transparent itemized scope lines. Buyers building a greenfield bottle line can order the complete matched package, while plants with central chilled water or compressed air can select only the units needed.
When is a dedicated mold dehumidifier recommended on an ISBM line?
Whenever chilled water runs below ambient workshop dew point—common in coastal, tropical, or summer monsoon climates—a mold dehumidifier prevents moisture droplets on blow cavities that would pit optical PETG, Tritan, or PC walls.
How do EU ESPR and Food Contact rules apply to ISBM auxiliary equipment?
No ESPR delegated act mandates a passport for plastics auxiliaries today. For food or pharma container lines, resin-contact hopper stainless steel grades and oil-free blowing air filtration classes are specified per project.
Which SanSong team sizes ISBM auxiliaries for a container project?
SanSong ISBM & Mold Sales Engineering sizes all four auxiliary units alongside your machine and mold via sales@lzsaso.com or +86 199 7615 8866 (International WhatsApp/WeChat: +86 157 7826 1897).