ISBM molding auxiliaries (dryer-loader, chiller, air compressor & mold dehumidifier)
Crystal-clear Tritan, PET, PETG, PC and PPSU bottles require strict polymer dew point, mold thermal stability and clean dry air. SanSong sizes and supplies all four auxiliary systems alongside your ISBM machine and mold.

Four utility & conditioning pillars for one-step ISBM lines
Each auxiliary unit addresses a specific physical variable in one-step injection stretch blow molding (moulding) — polymer moisture, mold core/cavity heat removal, stretch-blowing air purity and ambient cavity condensation.
| Auxiliary Equipment | Core Process Function | Sizing Basis in Written Proposal |
|---|---|---|
| 01 Dehumidifying dryer & auto-loader (3-in-1) | Integrates desiccant dehumidification, insulated drying hopper and closed-loop vacuum conveying to prevent moisture hydrolysis, bubbles, haze and IV drop in PET, RPET, PETG, Tritan, PC & PPSU | Resin grade drying temperature/time window × hourly shot weight throughput (kg/h); dual hoppers for two-color SS-400-60-03-02 / 03-06 |
| 02 Industrial chiller | Circulates constant-temperature chilled water through injection cores, neck lip plates, blow cavities and hydraulic oil heat exchangers for stable cycle times | Total polymer heat load (kW), mold circuit zones, ambient summer temperature (air-cooled vs. water-cooled) |
| 03 Air compressor system | Delivers clean, oil-free, pressure-stabilized compressed air (compressor, receiver tank, air dryer & multi-stage precision filters) for stretch-blowing and pneumatic cylinders | Container blow volume (up to 4.6 L) × cavity count (1–24) × cycle rate (pcs/h) & required blowing bar rating |
| 04 Mold dehumidifier | Supplies low-dew-point dry air around chilled clamping platens so ambient humidity never condenses into water marks on mirror-polished cavities | Mold platen enclosure volume, chilled-water set temperature vs. local workshop relative humidity |
Why size auxiliaries together with the ISBM machine and mold?
Undersized drying hoppers cause afternoon haze shifts when refill pellets enter too fast; undersized air receivers cause blow-pressure droop on wide-mouth or 24-cavity cycles; missing mold dehumidifiers force operators to raise chiller water temperature in summer, lengthening cycle times.
When SanSong prepares your ISBM machine and mold proposal, all four auxiliaries are itemized transparently with matched manifold ports, voltages (50/60 Hz) and utility floor layouts — allowing you either to order a complete turnkey package or cross-check existing plant utilities before machine arrival.
Get an itemized ISBM + mold + auxiliary utility worksheet
Share your container volume, target gram weight, polymer grade (e.g., PET, RPET, Tritan, PPSU, PP), hourly output target, local power supply (V / Hz) and summer workshop humidity. Contact sales@lzsaso.com or use the prefilled inquiry form.
Engineering & buyer questions
Practical answers on package scope, site utilities and customization.
Do two-color ISBM machines (SS-400-60-03-02 / 03-06) need two dehumidifying dryers?
Yes. Because main (65 mm) and side (45 mm) injection barrels feed two different colored melts or resin batches simultaneously, each barrel uses an independent drying hopper and vacuum loader sized to its shot ratio.
Can we reuse our factory’s central air compressor or cooling tower?
Yes. All four auxiliaries are quoted as optional line items. SanSong provides exact water flow/temperature and compressed-air pressure/consumption figures so your facility engineer can verify central capacity.
Which resins require dehumidifying drying versus hot-air drying?
Hygroscopic polyesters and engineering plastics — PET, RPET, PETG, PCTG (Tritan/ECOZEN), PC, PPSU and PMMA — require low-dew-point dehumidifying drying, whereas polyolefins such as PP and HDPE mainly require clean warm-air surface moisture removal.
Can SanSong match overseas 3-phase voltages (e.g. 220 V / 415 V / 480 V, 60 Hz) across auxiliaries?
Yes. Specify your destination country’s industrial voltage and frequency during quotation so the ISBM machine and all matched auxiliaries are built or transformer-matched to a unified electrical standard.




