Skip to content
EU Digital Product Passport

One-step ISBM bottle molds — EU Digital Product Passport

A voluntary draft prepared in anticipation of possible future EU Digital Product Passport requirements under the Ecodesign for Sustainable Products Regulation (ESPR). No delegated act covers this product group yet. This page is preparatory material and does not constitute proof of compliance, and the product has not been registered in the EU DPP registry. Regulation status checked on 19 November 2026.

1 / 11
Annex III items with data
Single item
Passport level
Not yet
DPP obligation (ESPR)
19 Nov 2026
Status checked
Digital Product PassportESPR · (EU) 2024/1781

One-step ISBM bottle molds

Manufacturer
Liuzhou Sansong Automation Technology Co., Ltd.
Identifier
Pending, see (b)
Draft record ID
sansong:isbm-moulds
Passport level
Single item
https://lzsaso.com/product-passport-isbm-mouldsEU Digital Product Passport data carrier (QR code, ISO/IEC 18004 Level Q)
Data carrier: QR code (ESPR Art. 9)
lzsaso.com/product-passport-isbm-moulds

Which rules apply to this product today

Product group: Tooling: molds for one-step injection stretch blow molding. Regulation (EU) 2024/1781 (ESPR) makes a Digital Product Passport mandatory only for product groups that a delegated act covers. No delegated act covers this group yet, so the passport below is a voluntary draft. It is organised around the items in Annex III and can be updated once the applicable requirements are set.

Other EU rules checked

  • Regulation (EU) 2023/1230 (Machinery): This regulation contains no product-passport provision. Whether the mold falls under it as supplied is for SanSong to confirm.
  • Regulation (EC) No 1935/2004 (Food Contact Materials): This framework regulation contains no Digital Product Passport requirement for molds. It governs finished food-contact articles. When molds are ordered for food, beverage or infant containers destined for the EU market, cavity surface finish, mold steel selection and hot-runner material documentation are confirmed per project.
  • Commission Regulation (EU) 2024/3190 (BPA in Food Contact Materials): This regulation contains no Digital Product Passport provision for molds. It restricts bisphenol A (BPA) in EU food-contact articles. Molds can be engineered for BPA-free resins including Tritan (PCTG), PPSU, PP, PET and RPET based on project drawings and resin datasheets.

EU DPP registry

The product is not registered. Under Implementing Regulation (EU) 2026/1778, a verified economic operator, or a verified representative acting for it, can register a product once the applicable product rules require a passport. This website does not register products on SanSong’s behalf.

The 11 items of ESPR Annex III

1 of 11 items carry data SanSong has published. Each pending item names the document or decision still missing.

(a)Pending

Product information

Information required by the delegated act

Pending: No ESPR delegated act covers this product group yet, so the information a passport must carry is not defined. The verified technical data is listed below.

(b)Pending

Unique product identifier

Model, batch or item, as the delegated act sets

Pending: Molds are made to order. SanSong has not yet provided information on how each mold set is identified; the numbering scheme remains subject to SanSong's confirmation.

(c)Pending

GTIN or equivalent

Global Trade Item Number (ISO/IEC 15459-6)

Pending: SanSong has not supplied a Global Trade Item Number (GTIN) for this product, and none is assigned on this page. How each individual product is identified is for SanSong to confirm.

(d)Pending

Commodity code

HS, CN or TARIC code

Pending: SanSong to confirm the code against its export declarations. For reference only: molds for plastics fall under HS heading 8480; this draft does not determine the applicable subheading.

(e)Pending

Conformity documents

Declaration of conformity, technical documentation, certificates

Pending: Waiting for SanSong to state which EU product rules apply to the mold as supplied (for example, when it is delivered with a machine) and to provide the related CE conformity documents (awaiting client DoC). SanSong holds a verified GB/T 19001-2016 / ISO 9001:2015 quality management system certificate (No. 11426Q00192R201, EACC, valid 2026-01-23 to 2029-01-22) covering hollow forming equipment and non-standard automatic devices; this QMS certificate does not replace a product conformity declaration.

(f)Pending

Instructions and safety

User manual, instructions, warnings, safety information

Pending: Waiting for SanSong's installation, handling and maintenance instructions for the mold (PDF). They will be linked here when received.

(g)Provided

Manufacturer

Name, trade name, postal address, contact, operator identifier

Name
Liuzhou Sansong Automation Technology Co., Ltd.
Trade name
SanSong
Unified Social Credit Code (USCC)
914502000674272010
Postal address
No. 3 Hexiang Road, Yanghe Industrial New Zone, Yufeng District, Liuzhou, Guangxi, China
Contact
sales@lzsaso.com · +86 199 7615 8866 (International WhatsApp / WeChat: +86 157 7826 1897)
Operator identifier
SanSong has not supplied a unique operator identifier yet (ESPR Article 12).

Source: SanSong brand unification master record (2026-11-19) and GB/T 19001-2016 / ISO 9001:2015 certificate No. 11426Q00192R201 (USCC 914502000674272010). Public trade name unified as SanSong. ISBM and mold sales contact confirmed in SanSong's 2026-11-19 brand unification record and April 2026 product brochures.

(h)Pending

Other economic operators

Identifiers of operators other than the manufacturer

Pending: SanSong to name any distributor or agent involved in EU sales, with its identifier.

(i)Pending

Facility identifiers

Unique identifiers of the production facilities

Pending: SanSong has not supplied a unique facility identifier for its plant in Liuzhou (ESPR Article 12). SanSong to confirm whether one exists.

(j)Pending

Importer

Importer details and EORI number

Pending: The EU importer depends on each order. SanSong to supply the importer and its EORI number for each order.

(k)Pending

EU responsible economic operator

Name, contact and identifier of the operator established in the EU

Pending: No economic operator established in the EU has been named yet (for example, an authorised representative). SanSong to confirm.

Verified technical data

Only data SanSong has published is listed. It is not the Annex III (a) information, which a delegated act will define.

Process
One-step injection stretch blow molding (injection core, neck mold, cavity, blow mold, ejection assembly, hot runner)
Design & mold sharing
Custom designed from container drawing or 3D-scanned sample, resin and target machine; shared neck half plate, hot runner and standard bases supported across matching neck/cavity families
Published cavity examples
1, 2, 3, 4, 6 and 24 cavities (handle bottles, inner-thread cups, sports bottles, juicer cups, bulb covers)
Resin compatibility
PET, RPET, PP, PC, PCTG (Tritan, ECOZEN), PPSU, PETG, AS, PS, PMMA, HDPE

Source: SanSong product page and SanSong April 2026 official product brochures (p. 23). Additional project parameters confirmed on request: Cavity range per resin, mold steel grades, rated mold service life, delivery lead time.

Repair, spare parts and lifecycle support

Spare parts
Standard wear components, seals, heaters, sensors, hydraulic valves and mold spare parts are supplied directly by SanSong (Liuzhou plant). Commercial spare-parts commitment period is specified in each equipment supply contract.
Technical service
Remote troubleshooting, on-site installation/commissioning, mold maintenance and operator training via sales@lzsaso.com · +86 199 7615 8866 (International WhatsApp / WeChat: +86 157 7826 1897).

Quality management system certificate

Standard
GB/T 19001-2016 / ISO 9001:2015
Certificate number
11426Q00192R201
Certification scope
The R&D, production, and sale of hollow forming equipment and non-standard automatic devices
Issuing body
Beijing East Allreach Certification Center Co., Ltd. (EACC)
Accreditation
CNAS C114-M / IAF MLA
Initial issue date
2020-05-26
Validity period
2026-01-23 – 2029-01-22
Verification portals
www.eacc.com.cn · www.cnca.gov.cn

Quality management system certificate covering both SanSong's ISBM hollow forming equipment and robotic / non-standard automation divisions (subject to periodic surveillance audits). It is a management-system certificate, not a CE Declaration of Conformity or proof under EU product legislation.

Machine-readable passport

passport.json carries the same Annex III items as this page, plus the technical data, repair details and QMS metadata, as structured JSON (format growthos.eu-dpp.v1). The page head also holds a schema.org Product record with the same identifiers.

Download passport.json
Download passport.json
/dpp/isbm-moulds/passport.json

Data carrier

An ISO/IEC 18004 Level Q QR code that opens https://lzsaso.com/product-passport-isbm-moulds. Proposed: on the mold nameplate and in the delivery documents. SanSong to confirm the position.

Retention and access

Proposed retention: this page and its machine-readable file stay online for the expected lifetime of the product plus at least 10 years, and earlier versions are kept when the passport changes. SanSong to confirm the period.

All 11 items are public; none is restricted. The passport holds no personal data of buyers or users.

Product passports

Passports for other SanSong products

FAQ

Passport questions

About the ISBM molds passport and the EU rules behind it.

Does this product need an EU Digital Product Passport today?

Icon Close line

Why are several items pending?

Icon Close line

How can a buyer or customs broker read this passport by machine?

Icon Close line

Who registers the product in the EU DPP registry?

Icon Close line

What will the QR code on the equipment open?

Icon Close line
Ready to automate your workflow?

Talk to our experts and discover the right solution for your production.