Skip to content
EU Digital Product Passport

Robot linear tracks (7th-axis floor and overhead rails) — EU Digital Product Passport

A voluntary draft prepared in anticipation of possible future EU Digital Product Passport requirements under the Ecodesign for Sustainable Products Regulation (ESPR). No delegated act covers this product group yet. This page is preparatory material and does not constitute proof of compliance, and the product has not been registered in the EU DPP registry. Regulation status checked on 19 November 2026.

1 / 11
Annex III items with data
Model
Passport level
Not yet
DPP obligation (ESPR)
19 Nov 2026
Status checked
Digital Product PassportESPR · (EU) 2024/1781

Robot linear tracks (7th-axis floor and overhead rails)

Manufacturer
Liuzhou Sansong Automation Technology Co., Ltd.
Identifier
Pending, see (b)
Draft record ID
sansong:robot-linear-tracks
Passport level
Model
https://lzsaso.com/product-passport-robot-linear-tracksEU Digital Product Passport data carrier (QR code, ISO/IEC 18004 Level Q)
Data carrier: QR code (ESPR Art. 9)
lzsaso.com/product-passport-robot-linear-tracks

Which rules apply to this product today

Product group: Robot peripheral equipment: traveling axis for industrial robots. Regulation (EU) 2024/1781 (ESPR) makes a Digital Product Passport mandatory only for product groups that a delegated act covers. No delegated act covers this group yet, so the passport below is a voluntary draft. It is organised around the items in Annex III and can be updated once the applicable requirements are set.

Other EU rules checked

  • Regulation (EU) 2023/1230 (Machinery): This regulation contains no product-passport provision. It applies to machinery placed on the EU market from 20 January 2027; until then, Machinery Directive 2006/42/EC applies. The documents and instructions in items (e) and (f) remain pending and are to be prepared under Machinery Directive 2006/42/EC or Machinery Regulation (EU) 2023/1230, as applicable to the product supplied. SanSong to confirm whether it supplies complete or partly completed machinery.

EU DPP registry

The product is not registered. Under Implementing Regulation (EU) 2026/1778, a verified economic operator, or a verified representative acting for it, can register a product once the applicable product rules require a passport. This website does not register products on SanSong’s behalf.

The 11 items of ESPR Annex III

1 of 11 items carry data SanSong has published. Each pending item names the document or decision still missing.

(a)Pending

Product information

Information required by the delegated act

Pending: No ESPR delegated act covers this product group yet, so the information a passport must carry is not defined. The verified technical data is listed below.

(b)Pending

Unique product identifier

Model, batch or item, as the delegated act sets

Pending: SanSong has not published model designations for its tracks yet. SanSong to supply the model list.

(c)Pending

GTIN or equivalent

Global Trade Item Number (ISO/IEC 15459-6)

Pending: SanSong has not supplied a Global Trade Item Number (GTIN) for this equipment, and none is assigned on this page. SanSong to confirm whether a GTIN exists.

(d)Pending

Commodity code

HS, CN or TARIC code

Pending: SanSong to confirm the code against its export declarations.

(e)Pending

Conformity documents

Declaration of conformity, technical documentation, certificates

Pending: Waiting for SanSong to provide the applicable CE declaration and technical documentation (awaiting client DoC). Under Machinery Directive 2006/42/EC, the declaration is an EC declaration of conformity or, for partly completed machinery, a declaration of incorporation. Under Machinery Regulation (EU) 2023/1230 from 20 January 2027, it is an EU declaration of conformity or, for partly completed machinery, an EU declaration of incorporation. SanSong holds a verified GB/T 19001-2016 / ISO 9001:2015 quality management system certificate (No. 11426Q00192R201, EACC, valid 2026-01-23 to 2029-01-22) covering hollow forming equipment and non-standard automatic devices; this QMS certificate does not replace a CE declaration of conformity or incorporation.

(f)Pending

Instructions and safety

User manual, instructions, warnings, safety information

Pending: Waiting for SanSong's instructions (PDF): a user manual with safety instructions if the equipment is supplied as complete machinery, or assembly instructions with safety information if it is supplied as partly completed machinery. They will be linked here when received.

(g)Provided

Manufacturer

Name, trade name, postal address, contact, operator identifier

Name
Liuzhou Sansong Automation Technology Co., Ltd.
Trade name
SanSong
Unified Social Credit Code (USCC)
914502000674272010
Postal address
No. 3 Hexiang Road, Yanghe Industrial New Zone, Yufeng District, Liuzhou, Guangxi, China
Contact
robot@lzsaso.com (transitional: lzsszdh@163.com) · +86 199 7722 6833
Operator identifier
SanSong has not supplied a unique operator identifier yet (ESPR Article 12).

Source: SanSong brand unification master record (2026-11-19) and GB/T 19001-2016 / ISO 9001:2015 certificate No. 11426Q00192R201 (USCC 914502000674272010). Public trade name unified as SanSong. Robotic automation contact confirmed in SanSong's 2026-11-19 brand unification record (robot@lzsaso.com added as official corporate address; lzsszdh@163.com retained during transition).

(h)Pending

Other economic operators

Identifiers of operators other than the manufacturer

Pending: SanSong to name any distributor or agent involved in EU sales, with its identifier.

(i)Pending

Facility identifiers

Unique identifiers of the production facilities

Pending: SanSong has not supplied a unique facility identifier for its plant in Liuzhou (ESPR Article 12). SanSong to confirm whether one exists.

(j)Pending

Importer

Importer details and EORI number

Pending: The EU importer depends on each order. SanSong to supply the importer and its EORI number for each order.

(k)Pending

EU responsible economic operator

Name, contact and identifier of the operator established in the EU

Pending: No economic operator established in the EU has been named yet (for example, an authorised representative). SanSong to confirm.

Verified technical data

Only data SanSong has published is listed. It is not the Annex III (a) information, which a delegated act will define.

Types
Ground linear tracks, overhead gantry tracks, general 7th-axis traveling units
Function
Moves an industrial robot across multiple workstations to extend its effective working envelope
Configuration
Stroke length, payload rating, gear-rack drive and lubrication matched to robot model and floor layout

Source: SanSong product page. Additional project parameters confirmed on request: Standard model list, travel lengths, load ratings, travel speed and repeatability.

Repair, spare parts and lifecycle support

Spare parts
Mechanical wear parts, rotary seals, drive/rail spares and fixture tooling spares are supplied by SanSong (Liuzhou plant). Project-specific robot and controller spares follow the integrated OEM brands and project supply contract.
Technical service
Custom line engineering, robot installation, commissioning and lifecycle maintenance via robot@lzsaso.com (transitional: lzsszdh@163.com) · +86 199 7722 6833.

Quality management system certificate

Standard
GB/T 19001-2016 / ISO 9001:2015
Certificate number
11426Q00192R201
Certification scope
The R&D, production, and sale of hollow forming equipment and non-standard automatic devices
Issuing body
Beijing East Allreach Certification Center Co., Ltd. (EACC)
Accreditation
CNAS C114-M / IAF MLA
Initial issue date
2020-05-26
Validity period
2026-01-23 – 2029-01-22
Verification portals
www.eacc.com.cn · www.cnca.gov.cn

Quality management system certificate covering both SanSong's ISBM hollow forming equipment and robotic / non-standard automation divisions (subject to periodic surveillance audits). It is a management-system certificate, not a CE Declaration of Conformity or proof under EU product legislation.

Machine-readable passport

passport.json carries the same Annex III items as this page, plus the technical data, repair details and QMS metadata, as structured JSON (format growthos.eu-dpp.v1). The page head also holds a schema.org Product record with the same identifiers.

Download passport.json
Download passport.json
/dpp/robot-linear-tracks/passport.json

Data carrier

An ISO/IEC 18004 Level Q QR code that opens https://lzsaso.com/product-passport-robot-linear-tracks. Proposed: next to the machine nameplate and in the delivery documents. SanSong to confirm the position.

Retention and access

Proposed retention: this page and its machine-readable file stay online for the expected lifetime of the product plus at least 10 years, and earlier versions are kept when the passport changes. SanSong to confirm the period.

All 11 items are public; none is restricted. The passport holds no personal data of buyers or users.

Product passports

Passports for other SanSong products

FAQ

Passport questions

About the robot linear tracks (7th-axis floor and overhead rails) passport and the EU rules behind it.

Does this product need an EU Digital Product Passport today?

Icon Close line

Why are several items pending?

Icon Close line

How can a buyer or customs broker read this passport by machine?

Icon Close line

Who registers the product in the EU DPP registry?

Icon Close line

What will the QR code on the equipment open?

Icon Close line
Ready to automate your workflow?

Talk to our experts and discover the right solution for your production.