Product information
Information required by the delegated act
Pending: No ESPR delegated act covers this product group yet, so the information a passport must carry is not defined. The verified technical data is listed below.
A voluntary draft prepared in anticipation of possible future EU Digital Product Passport requirements under the Ecodesign for Sustainable Products Regulation (ESPR). No delegated act covers this product group yet. This page is preparatory material and does not constitute proof of compliance, and the product has not been registered in the EU DPP registry. Regulation status checked on 19 November 2026.
Flexible tooling fixtures, inspection gauges and smart robotic cells
SanSong’s Flexible Fixtures and Smart Robotic Cells line addresses high-mix, multi-variant fabrication where frequent batch changeovers otherwise stall robotic welding and assembly utilization. Deliverables span modular pneumatic/hydraulic/servo quick-change welding fixtures, precision dimensional inspection gauges, flexible robotic workstations, custom cell-scheduling and process-control software, and in-house CNC machining of precision robot brackets, risers, and locating blocks at the 9,336 m² Liuzhou plant.
Each flexible fixture incorporates hardened datum pins, repeatable sub-plate zero-point or dowel interfaces, clamp-open/clamp-closed inductive sensors, part-presence poka-yoke switches, and binary or RFID tooling identification so the cell PLC and industrial robot automatically load the matching weld or inspection recipe without manual teach-pendant selection errors.
Depending on buyer scope, SanSong supplies standalone manual/pneumatic fixtures and checking gauges or complete robot-integrated flexible manufacturing cells. Under EU Machinery Directive 2006/42/EC and Regulation (EU) 2023/1230, powered clamping fixtures and robotic cells require project-specific determination of partly completed machinery incorporation versus complete cell conformity documentation.
Product group: Tooling and automation: multi-SKU flexible fixtures, gauges and smart robotic workstations. Regulation (EU) 2024/1781 (ESPR) makes a Digital Product Passport mandatory only for product groups that a delegated act covers. No delegated act covers this group yet, so the passport below is a voluntary draft. It is organised around the items in Annex III and can be updated once the applicable requirements are set.
The product is not registered. Under Implementing Regulation (EU) 2026/1778, a verified economic operator, or a verified representative acting for it, can register a product once the applicable product rules require a passport. This website does not register products on SanSong’s behalf.
1 of 11 items carry data SanSong has published. Each pending item names the document or decision still missing.
Information required by the delegated act
Pending: No ESPR delegated act covers this product group yet, so the information a passport must carry is not defined. The verified technical data is listed below.
Model, batch or item, as the delegated act sets
Pending: Flexible fixtures, inspection gauges and smart cells are built to order from customer part CAD. SanSong assigns fixture and cell serial numbers per project contract.
Global Trade Item Number (ISO/IEC 15459-6)
Pending: SanSong has not supplied a Global Trade Item Number (GTIN) for this product, and none is assigned on this page. How each individual product is identified is for SanSong to confirm.
HS, CN or TARIC code
Pending: SanSong to confirm the commodity code against its export declarations depending on whether standalone fixtures/gauges or complete robotic cells are supplied.
Declaration of conformity, technical documentation, certificates
Pending: Waiting for SanSong to provide the applicable CE declaration and technical documentation (awaiting client DoC). Under Machinery Directive 2006/42/EC, the declaration is an EC declaration of conformity or, for partly completed machinery, a declaration of incorporation. Under Machinery Regulation (EU) 2023/1230 from 20 January 2027, it is an EU declaration of conformity or, for partly completed machinery, an EU declaration of incorporation. SanSong holds a verified GB/T 19001-2016 / ISO 9001:2015 quality management system certificate (No. 11426Q00192R201, EACC, valid 2026-01-23 to 2029-01-22) covering hollow forming equipment and non-standard automatic devices; this QMS certificate does not replace a CE declaration of conformity or incorporation.
User manual, instructions, warnings, safety information
Pending: Waiting for SanSong's instructions (PDF): a user manual with safety instructions if the equipment is supplied as complete machinery, or assembly instructions with safety information if it is supplied as partly completed machinery. They will be linked here when received.
Name, trade name, postal address, contact, operator identifier
Source: SanSong brand unification master record (2026-11-19) and GB/T 19001-2016 / ISO 9001:2015 certificate No. 11426Q00192R201 (USCC 914502000674272010). Public trade name unified as SanSong. Robotic automation contact confirmed in SanSong's 2026-11-19 brand unification record (robot@lzsaso.com added as official corporate address; lzsszdh@163.com retained during transition).
Identifiers of operators other than the manufacturer
Pending: Robots and controllers built into a system may come from other manufacturers. SanSong to supply, for each project, the name and unique operator identifier of each such manufacturer and of any distributor or agent involved in EU sales.
Unique identifiers of the production facilities
Pending: SanSong has not supplied a unique facility identifier for its plant in Liuzhou (ESPR Article 12). SanSong to confirm whether one exists.
Importer details and EORI number
Pending: The EU importer depends on each order. SanSong to supply the importer and its EORI number for each order.
Name, contact and identifier of the operator established in the EU
Pending: No economic operator established in the EU has been named yet (for example, an authorised representative). SanSong to confirm.
Only data SanSong has published is listed. It is not the Annex III (a) information, which a delegated act will define.
Source: SanSong product page and SanSong 2026 Seven-Product-Lines Catalog (Slide 24). Additional project parameters confirmed on request: Per-project datum repeatability, clamping cylinder force, changeover time target, pneumatic/electrical schematics and gauge R&R protocol.
Quality management system certificate covering both SanSong's ISBM hollow forming equipment and robotic / non-standard automation divisions (subject to periodic surveillance audits). It is a management-system certificate, not a CE Declaration of Conformity or proof under EU product legislation.
passport.json carries the same Annex III items as this page, plus the technical data, repair details and QMS metadata, as structured JSON (format growthos.eu-dpp.v1). The page head also holds a schema.org Product record with the same identifiers.
An ISO/IEC 18004 Level Q QR code that opens https://lzsaso.com/product-passport-flexible-fixtures-and-cells. Proposed: next to the machine nameplate and in the delivery documents. SanSong to confirm the position.
Proposed retention: this page and its machine-readable file stay online for the expected lifetime of the product plus at least 10 years, and earlier versions are kept when the passport changes. SanSong to confirm the period.
All 11 items are public; none is restricted. The passport holds no personal data of buyers or users.
Regulation status checked on 19 November 2026; it is checked again every quarter. Passport version 2026-11-22.
Evolving steadily from welding fixtures (2014) to turnkey workstations and automated lines — and designated in 2022 as the Liuzhou Municipal Smart Welding Equipment Engineering Technology Research Center — SanSong also offers dedicated pages for standardized spot welding, laser/spraying cells, and flexible fixtures:
8-item turnkey package: 1.8 m / 35 kg arm, SSDHKZ-400A MF controller, 40 kN C/X weld gun, 17 kA transformer & auto tip wear compensation.
Turnkey fiber-laser welding/cutting workstations with zero-gap fixtures and enclosed multi-axis industrial spraying booths.
Quick-change pneumatic/servo welding fixtures, GD&T checking gauges, recipe-verification PLC software & in-house CNC machining.
About the flexible fixtures, gauges & smart cells passport and the EU rules behind it.
What five engineering capabilities are bundled in SanSong’s flexible manufacturing line?
It combines: (1) multi-SKU flexible welding/assembly fixtures, (2) dimensional checking gauges, (3) smart flexible robotic workstations, (4) industrial scheduling/control software R&D, and (5) in-house CNC precision robot-part machining.
How do SanSong flexible fixtures prevent wrong-part or wrong-program welding?
Quick-change fixture plates carry presence sensors, clamp-confirmation switches, and tooling ID codes read by the PLC so the robot starts only when the expected part and matching fixture recipe agree.
Does SanSong hold granted CNIPA patents in robotic clamping and inspection fixtures?
Yes. SanSong holds 10 invention patents and 33 utility model patents under ISO 9001:2015 QMS (Cert. 11426Q00192R201), including granted CNIPA patents for robotic wrist clamps, welding positioning jigs, and torsion-beam angle inspection.
What CAD and tolerance inputs are needed to quote a flexible fixture or checking gauge?
Share 3D STEP/IGES models of all co-line part variants, GD&T datum schemes, weld spot/seam maps, target changeover minutes, and existing robot or positioner mounting interfaces.
Where is machine-readable passport data published for flexible fixtures and cells?
Download /dpp/flexible-fixtures-and-cells/passport.json (or /zh/dpp/flexible-fixtures-and-cells/passport.json) in growthos.eu-dpp.v1 JSON format directly from the summary card above.