Product information
Information required by the delegated act
Pending: No ESPR delegated act covers this product group yet, so the information a passport must carry is not defined. The verified technical data is listed below.
A voluntary draft prepared in anticipation of possible future EU Digital Product Passport requirements under the Ecodesign for Sustainable Products Regulation (ESPR). No delegated act covers this product group yet. This page is preparatory material and does not constitute proof of compliance, and the product has not been registered in the EU DPP registry. Regulation status checked on 19 November 2026.
Laser welding, cutting and spraying robot workstations
SanSong expanded into turnkey laser welding and laser cutting equipment in 2022 alongside industrial spraying robot workstations at its Liuzhou manufacturing base. Laser workstations pair six-axis industrial manipulators or dedicated motion gantries with fiber-laser sources, wobble or seam-tracking processing heads, precision clamping fixtures, HL-series positioners, and fume-extraction enclosures for thin-gauge stainless steel, aluminum enclosures, and structural weldments.
Spraying robot workstations integrate multi-axis painting arms with metering pumps, spray guns, multi-station workpiece turntables or overhead conveyors, booth air-curtain filtration, and explosion-protection electrical hardware so primers, topcoats, and protective coatings are applied with repeatable film build while keeping operators outside solvent mist zones.
Because laser source power (kW), optical safety enclosure class (EN 60825 / ISO 11553), spray-booth ventilation airflow, and explosive-atmosphere zoning depend entirely on customer part geometry and coating chemistry, this passport uses single-item granularity. Annex III items (e), (f), and (h) track project-specific CE declarations, laser/ATEX safety manuals, and integrated laser/robot OEM operator identifiers.
Product group: Machinery: custom robotic laser processing and surface-spraying workstations. Regulation (EU) 2024/1781 (ESPR) makes a Digital Product Passport mandatory only for product groups that a delegated act covers. No delegated act covers this group yet, so the passport below is a voluntary draft. It is organised around the items in Annex III and can be updated once the applicable requirements are set.
The product is not registered. Under Implementing Regulation (EU) 2026/1778, a verified economic operator, or a verified representative acting for it, can register a product once the applicable product rules require a passport. This website does not register products on SanSong’s behalf.
1 of 11 items carry data SanSong has published. Each pending item names the document or decision still missing.
Information required by the delegated act
Pending: No ESPR delegated act covers this product group yet, so the information a passport must carry is not defined. The verified technical data is listed below.
Model, batch or item, as the delegated act sets
Pending: Laser processing cells and spraying booths are engineered to order around each customer workpiece. SanSong confirms the system serial identifier on the project nameplate.
Global Trade Item Number (ISO/IEC 15459-6)
Pending: SanSong has not supplied a Global Trade Item Number (GTIN) for this product, and none is assigned on this page. How each individual product is identified is for SanSong to confirm.
HS, CN or TARIC code
Pending: SanSong to confirm the commodity code against its export declarations for each laser or spraying workstation.
Declaration of conformity, technical documentation, certificates
Pending: Waiting for SanSong to provide the applicable CE declaration and technical documentation (awaiting client DoC). Under Machinery Directive 2006/42/EC, the declaration is an EC declaration of conformity or, for partly completed machinery, a declaration of incorporation. Under Machinery Regulation (EU) 2023/1230 from 20 January 2027, it is an EU declaration of conformity or, for partly completed machinery, an EU declaration of incorporation. SanSong holds a verified GB/T 19001-2016 / ISO 9001:2015 quality management system certificate (No. 11426Q00192R201, EACC, valid 2026-01-23 to 2029-01-22) covering hollow forming equipment and non-standard automatic devices; this QMS certificate does not replace a CE declaration of conformity or incorporation.
User manual, instructions, warnings, safety information
Pending: Waiting for SanSong's instructions (PDF): a user manual with safety instructions if the equipment is supplied as complete machinery, or assembly instructions with safety information if it is supplied as partly completed machinery. They will be linked here when received.
Name, trade name, postal address, contact, operator identifier
Source: SanSong brand unification master record (2026-11-19) and GB/T 19001-2016 / ISO 9001:2015 certificate No. 11426Q00192R201 (USCC 914502000674272010). Public trade name unified as SanSong. Robotic automation contact confirmed in SanSong's 2026-11-19 brand unification record (robot@lzsaso.com added as official corporate address; lzsszdh@163.com retained during transition).
Identifiers of operators other than the manufacturer
Pending: Robots and controllers built into a system may come from other manufacturers. SanSong to supply, for each project, the name and unique operator identifier of each such manufacturer and of any distributor or agent involved in EU sales.
Unique identifiers of the production facilities
Pending: SanSong has not supplied a unique facility identifier for its plant in Liuzhou (ESPR Article 12). SanSong to confirm whether one exists.
Importer details and EORI number
Pending: The EU importer depends on each order. SanSong to supply the importer and its EORI number for each order.
Name, contact and identifier of the operator established in the EU
Pending: No economic operator established in the EU has been named yet (for example, an authorised representative). SanSong to confirm.
Only data SanSong has published is listed. It is not the Annex III (a) information, which a delegated act will define.
Source: SanSong product page and SanSong 2026 Seven-Product-Lines Catalog (Slides 19–20). Additional project parameters confirmed on request: Laser source brand/kW, optical wavelength/enclosure class, spray booth airflow/explosion rating, footprint and connected power.
Quality management system certificate covering both SanSong's ISBM hollow forming equipment and robotic / non-standard automation divisions (subject to periodic surveillance audits). It is a management-system certificate, not a CE Declaration of Conformity or proof under EU product legislation.
passport.json carries the same Annex III items as this page, plus the technical data, repair details and QMS metadata, as structured JSON (format growthos.eu-dpp.v1). The page head also holds a schema.org Product record with the same identifiers.
An ISO/IEC 18004 Level Q QR code that opens https://lzsaso.com/product-passport-laser-and-spraying-robots. Proposed: next to the machine nameplate and in the delivery documents. SanSong to confirm the position.
Proposed retention: this page and its machine-readable file stay online for the expected lifetime of the product plus at least 10 years, and earlier versions are kept when the passport changes. SanSong to confirm the period.
All 11 items are public; none is restricted. The passport holds no personal data of buyers or users.
Regulation status checked on 19 November 2026; it is checked again every quarter. Passport version 2026-11-22.
Evolving steadily from welding fixtures (2014) to turnkey workstations and automated lines — and designated in 2022 as the Liuzhou Municipal Smart Welding Equipment Engineering Technology Research Center — SanSong also offers dedicated pages for standardized spot welding, laser/spraying cells, and flexible fixtures:
8-item turnkey package: 1.8 m / 35 kg arm, SSDHKZ-400A MF controller, 40 kN C/X weld gun, 17 kA transformer & auto tip wear compensation.
Turnkey fiber-laser welding/cutting workstations with zero-gap fixtures and enclosed multi-axis industrial spraying booths.
Quick-change pneumatic/servo welding fixtures, GD&T checking gauges, recipe-verification PLC software & in-house CNC machining.
About the laser & spraying robot systems passport and the EU rules behind it.
When did SanSong launch its laser welding and cutting workstation line?
SanSong launched its robotic and dedicated laser welding and cutting turnkey systems in 2022, building on its robotic fixture and welding workstation engineering experience dating back to 2014.
Why does this passport group laser cells and spraying workstations at single-item level?
Every laser cell or painting booth is custom-sized around part dimensions, laser kW or paint flow rate, fume/VOC extraction volume, and floor layout rather than sold as an off-the-shelf catalog SKU.
Can SanSong HL positioners and 7th-axis tracks be integrated into laser or spraying cells?
Yes. Single-, dual-, and tri-axis HL positioners as well as HLD/HLT linear tracks are routinely coordinated with laser and spraying robots to reach multi-face seams or coat long structural frames.
What safety parameters must be defined before quoting a laser or spraying cell for Europe?
Laser cells require Class 1 light-tight guarding, interlocked viewing windows, and fume filtration; solvent spraying booths require explosion-protection zoning and airflow balance, all confirmed in the project risk assessment.
How do buyers request a laser welding, laser cutting or spraying workstation proposal?
Send part 3D drawings, material thickness or coating specification, and takt-time target to SanSong Robotics Division at robot@lzsaso.com or +86 199 7722 6833.