Product information
Information required by the delegated act
Pending: No ESPR delegated act covers this product group yet, so the information a passport must carry is not defined. The verified technical data is listed below.
A voluntary draft prepared in anticipation of possible future EU Digital Product Passport requirements under the Ecodesign for Sustainable Products Regulation (ESPR). No delegated act covers this product group yet. This page is preparatory material and does not constitute proof of compliance, and the product has not been registered in the EU DPP registry. Regulation status checked on 19 November 2026.
SSR-R1.8/35 lightweight spot-welding robot package
Model SSR-R1.8/35 is SanSong Robotics Division’s standardized lightweight resistance spot-welding package, deployed across 500 cumulative sets in automotive stamping shops, appliance hardware plants, two- and three-wheel electric vehicle factories, battery-pack sheet-metal bays, switchgear cabinets, and cable-tray lines. The 8-item core package pairs the SSR-R1.8/35 six-axis manipulator (1.8 m working radius, 35 kg wrist payload) with the SSDHKZ-400A medium-frequency welding controller (welding current ceiling 400 A) and the SSDHBYQ-01-9021 transformer (17 kA secondary current at 20% duty cycle).
Buyers select either the C-type C01-3025 gun or the X-type X01-2506 scissor gun (throat width ≤ 250 mm, opening stroke 100 mm, electrode clamping force 40 kN). Standard peripherals include an integrated water/power/air dress pack, a water-air control unit handling gun actuation, pressure switching and water-flow sensing, a floor pedestal up to 700 mm high, and automatic electrode cap wear detection with TCP path compensation.
Optional scope items cover a single-blade electrode tip dresser with copper-chip collection box, an adjustable recirculating chiller, safety perimeter fencing with light curtains, and poka-yoke clamping fixtures. Site utilities require ≥ 8 L/min cooling water at 0.2 MPa and ≥ 0.4 MPa compressed air. Under EU Directive 2006/42/EC or Regulation (EU) 2023/1230, conformity vs. incorporation documentation depends on whether the package ships standalone or inside a guarded SanSong workstation.
Product group: Welding robotics: standardized industrial spot-welding robot package. Regulation (EU) 2024/1781 (ESPR) makes a Digital Product Passport mandatory only for product groups that a delegated act covers. No delegated act covers this group yet, so the passport below is a voluntary draft. It is organised around the items in Annex III and can be updated once the applicable requirements are set.
The product is not registered. Under Implementing Regulation (EU) 2026/1778, a verified economic operator, or a verified representative acting for it, can register a product once the applicable product rules require a passport. This website does not register products on SanSong’s behalf.
2 of 11 items carry data SanSong has published. Each pending item names the document or decision still missing.
Information required by the delegated act
Pending: No ESPR delegated act covers this product group yet, so the information a passport must carry is not defined. The verified technical data is listed below.
Model, batch or item, as the delegated act sets
SSR-R1.8/35
Source: Model designation published in SanSong 2026 Seven-Product-Lines Catalog (Slide 18: Lightweight Spot-Welding Robot System).
Global Trade Item Number (ISO/IEC 15459-6)
Pending: SanSong has not supplied a Global Trade Item Number (GTIN) for this equipment, and none is assigned on this page. Until a delegated act sets the format, this draft identifies the product by its published model designation. SanSong to confirm whether a GTIN exists.
HS, CN or TARIC code
Pending: SanSong to confirm the code against its export declarations. For reference only: industrial welding robots fall under HS heading 8479 or 8515 depending on supply configuration; this draft does not determine the applicable subheading.
Declaration of conformity, technical documentation, certificates
Pending: Waiting for SanSong to provide the applicable CE declaration and technical documentation (awaiting client DoC). Under Machinery Directive 2006/42/EC, the declaration is an EC declaration of conformity or, for partly completed machinery, a declaration of incorporation. Under Machinery Regulation (EU) 2023/1230 from 20 January 2027, it is an EU declaration of conformity or, for partly completed machinery, an EU declaration of incorporation. SanSong holds a verified GB/T 19001-2016 / ISO 9001:2015 quality management system certificate (No. 11426Q00192R201, EACC, valid 2026-01-23 to 2029-01-22) covering hollow forming equipment and non-standard automatic devices; this QMS certificate does not replace a CE declaration of conformity or incorporation.
User manual, instructions, warnings, safety information
Pending: Waiting for SanSong's instructions (PDF): a user manual with safety instructions if the equipment is supplied as complete machinery, or assembly instructions with safety information if it is supplied as partly completed machinery. They will be linked here when received.
Name, trade name, postal address, contact, operator identifier
Source: SanSong brand unification master record (2026-11-19) and GB/T 19001-2016 / ISO 9001:2015 certificate No. 11426Q00192R201 (USCC 914502000674272010). Public trade name unified as SanSong. Robotic automation contact confirmed in SanSong's 2026-11-19 brand unification record (robot@lzsaso.com added as official corporate address; lzsszdh@163.com retained during transition).
Identifiers of operators other than the manufacturer
Pending: Robots and controllers built into a system may come from other manufacturers. SanSong to supply, for each project, the name and unique operator identifier of each such manufacturer and of any distributor or agent involved in EU sales.
Unique identifiers of the production facilities
Pending: SanSong has not supplied a unique facility identifier for its plant in Liuzhou (ESPR Article 12). SanSong to confirm whether one exists.
Importer details and EORI number
Pending: The EU importer depends on each order. SanSong to supply the importer and its EORI number for each order.
Name, contact and identifier of the operator established in the EU
Pending: No economic operator established in the EU has been named yet (for example, an authorised representative). SanSong to confirm.
Only data SanSong has published is listed. It is not the Annex III (a) information, which a delegated act will define.
Source: SanSong product page and SanSong 2026 Seven-Product-Lines Catalog (Slide 18). Additional project parameters confirmed on request: Mains kVA supply requirement, gun throat depth drawing for C01-3025 vs X01-2506, and cell safety fence layout.
Quality management system certificate covering both SanSong's ISBM hollow forming equipment and robotic / non-standard automation divisions (subject to periodic surveillance audits). It is a management-system certificate, not a CE Declaration of Conformity or proof under EU product legislation.
passport.json carries the same Annex III items as this page, plus the technical data, repair details and QMS metadata, as structured JSON (format growthos.eu-dpp.v1). The page head also holds a schema.org Product record with the same identifiers.
An ISO/IEC 18004 Level Q QR code that opens https://lzsaso.com/product-passport-ssr-r18-35-spot-welding-robot. Proposed: next to the machine nameplate and in the delivery documents. SanSong to confirm the position.
Proposed retention: this page and its machine-readable file stay online for the expected lifetime of the product plus at least 10 years, and earlier versions are kept when the passport changes. SanSong to confirm the period.
All 11 items are public; none is restricted. The passport holds no personal data of buyers or users.
Regulation status checked on 19 November 2026; it is checked again every quarter. Passport version 2026-11-22.
Evolving steadily from welding fixtures (2014) to turnkey workstations and automated lines — and designated in 2022 as the Liuzhou Municipal Smart Welding Equipment Engineering Technology Research Center — SanSong also offers dedicated pages for standardized spot welding, laser/spraying cells, and flexible fixtures:
8-item turnkey package: 1.8 m / 35 kg arm, SSDHKZ-400A MF controller, 40 kN C/X weld gun, 17 kA transformer & auto tip wear compensation.
Turnkey fiber-laser welding/cutting workstations with zero-gap fixtures and enclosed multi-axis industrial spraying booths.
Quick-change pneumatic/servo welding fixtures, GD&T checking gauges, recipe-verification PLC software & in-house CNC machining.
About the SSR-R1.8/35 spot-welding robot package passport and the EU rules behind it.
What 8 items are included as standard in the SSR-R1.8/35 spot-welding package?
The standard package includes: (1) SSR-R1.8/35 robot (1.8 m / 35 kg), (2) SSDHKZ-400A MF controller, (3) C01-3025 or X01-2506 40 kN weld gun, (4) SSDHBYQ-01-9021 17 kA transformer, (5) integrated dress pack, (6) water-air control unit, (7) ≤ 700 mm pedestal, and (8) automatic electrode wear compensation.
What cooling water and compressed air utilities does SSR-R1.8/35 require?
Published site utility requirements specify cooling water flow of at least 8 L/min at 0.2 MPa pressure for the transformer and gun electrodes, plus clean compressed air at 0.4 MPa or above.
How do buyers choose between the C01-3025 C-gun and X01-2506 X-gun?
Both guns share a ≤ 250 mm throat width, 100 mm opening stroke, and 40 kN electrode force. C-guns suit vertical flange access and box corners, whereas X-guns clear wide sheet edges; SanSong checks gun approach in 3D against your part CAD.
Is an EU Digital Product Passport mandatory for SSR-R1.8/35 today?
No ESPR delegated act under Regulation (EU) 2024/1781 currently covers industrial welding robots. This SSR-R1.8/35 record and /dpp/ssr-r18-35-spot-welding-robot/passport.json are voluntary preparatory drafts.
Which optional modules can be added around SSR-R1.8/35 for a turnkey cell?
Buyers can add an automatic single-blade electrode tip dresser with copper-chip collector, an adjustable chiller, HL-series positioners, HLD floor tracks, poka-yoke fixtures, and interlocked safety fencing via robot@lzsaso.com.